Commit d4513851 authored by Tannin Rachel's avatar Tannin Rachel
Browse files

软件I2C控制MPU6050(未完成版)

parent d5848884
This diff is collapsed.
[PreviousLibFiles]
LibFiles=Drivers\STM32F1xx_HAL_Driver\Inc\stm32f1xx_hal_tim.h;Drivers\STM32F1xx_HAL_Driver\Inc\stm32f1xx_hal_tim_ex.h;Drivers\STM32F1xx_HAL_Driver\Inc\stm32f1xx_ll_tim.h;Drivers\STM32F1xx_HAL_Driver\Inc\Legacy\stm32_hal_legacy.h;Drivers\STM32F1xx_HAL_Driver\Inc\stm32f1xx_hal.h;Drivers\STM32F1xx_HAL_Driver\Inc\stm32f1xx_hal_def.h;Drivers\STM32F1xx_HAL_Driver\Inc\stm32f1xx_hal_rcc.h;Drivers\STM32F1xx_HAL_Driver\Inc\stm32f1xx_hal_rcc_ex.h;Drivers\STM32F1xx_HAL_Driver\Inc\stm32f1xx_ll_bus.h;Drivers\STM32F1xx_HAL_Driver\Inc\stm32f1xx_ll_rcc.h;Drivers\STM32F1xx_HAL_Driver\Inc\stm32f1xx_ll_system.h;Drivers\STM32F1xx_HAL_Driver\Inc\stm32f1xx_ll_utils.h;Drivers\STM32F1xx_HAL_Driver\Inc\stm32f1xx_hal_gpio.h;Drivers\STM32F1xx_HAL_Driver\Inc\stm32f1xx_hal_gpio_ex.h;Drivers\STM32F1xx_HAL_Driver\Src\stm32f1xx_hal_gpio_ex.c;Drivers\STM32F1xx_HAL_Driver\Inc\stm32f1xx_ll_gpio.h;Drivers\STM32F1xx_HAL_Driver\Inc\stm32f1xx_hal_dma_ex.h;Drivers\STM32F1xx_HAL_Driver\Inc\stm32f1xx_hal_dma.h;Drivers\STM32F1xx_HAL_Driver\Inc\stm32f1xx_ll_dma.h;Drivers\STM32F1xx_HAL_Driver\Inc\stm32f1xx_hal_cortex.h;Drivers\STM32F1xx_HAL_Driver\Inc\stm32f1xx_ll_cortex.h;Drivers\STM32F1xx_HAL_Driver\Inc\stm32f1xx_hal_pwr.h;Drivers\STM32F1xx_HAL_Driver\Inc\stm32f1xx_ll_pwr.h;Drivers\STM32F1xx_HAL_Driver\Inc\stm32f1xx_hal_flash.h;Drivers\STM32F1xx_HAL_Driver\Inc\stm32f1xx_hal_flash_ex.h;Drivers\STM32F1xx_HAL_Driver\Inc\stm32f1xx_hal_exti.h;Drivers\STM32F1xx_HAL_Driver\Inc\stm32f1xx_ll_exti.h;Drivers\STM32F1xx_HAL_Driver\Inc\stm32f1xx_hal_uart.h;Drivers\STM32F1xx_HAL_Driver\Inc\stm32f1xx_ll_usart.h;Drivers\STM32F1xx_HAL_Driver\Src\stm32f1xx_hal_tim.c;Drivers\STM32F1xx_HAL_Driver\Src\stm32f1xx_hal_tim_ex.c;Drivers\STM32F1xx_HAL_Driver\Src\stm32f1xx_hal.c;Drivers\STM32F1xx_HAL_Driver\Src\stm32f1xx_hal_rcc.c;Drivers\STM32F1xx_HAL_Driver\Src\stm32f1xx_hal_rcc_ex.c;Drivers\STM32F1xx_HAL_Driver\Src\stm32f1xx_hal_gpio.c;Drivers\STM32F1xx_HAL_Driver\Src\stm32f1xx_hal_dma.c;Drivers\STM32F1xx_HAL_Driver\Src\stm32f1xx_hal_cortex.c;Drivers\STM32F1xx_HAL_Driver\Src\stm32f1xx_hal_pwr.c;Drivers\STM32F1xx_HAL_Driver\Src\stm32f1xx_hal_flash.c;Drivers\STM32F1xx_HAL_Driver\Src\stm32f1xx_hal_flash_ex.c;Drivers\STM32F1xx_HAL_Driver\Src\stm32f1xx_hal_exti.c;Drivers\STM32F1xx_HAL_Driver\Src\stm32f1xx_hal_uart.c;Drivers\STM32F1xx_HAL_Driver\Inc\stm32f1xx_hal_tim.h;Drivers\STM32F1xx_HAL_Driver\Inc\stm32f1xx_hal_tim_ex.h;Drivers\STM32F1xx_HAL_Driver\Inc\stm32f1xx_ll_tim.h;Drivers\STM32F1xx_HAL_Driver\Inc\Legacy\stm32_hal_legacy.h;Drivers\STM32F1xx_HAL_Driver\Inc\stm32f1xx_hal.h;Drivers\STM32F1xx_HAL_Driver\Inc\stm32f1xx_hal_def.h;Drivers\STM32F1xx_HAL_Driver\Inc\stm32f1xx_hal_rcc.h;Drivers\STM32F1xx_HAL_Driver\Inc\stm32f1xx_hal_rcc_ex.h;Drivers\STM32F1xx_HAL_Driver\Inc\stm32f1xx_ll_bus.h;Drivers\STM32F1xx_HAL_Driver\Inc\stm32f1xx_ll_rcc.h;Drivers\STM32F1xx_HAL_Driver\Inc\stm32f1xx_ll_system.h;Drivers\STM32F1xx_HAL_Driver\Inc\stm32f1xx_ll_utils.h;Drivers\STM32F1xx_HAL_Driver\Inc\stm32f1xx_hal_gpio.h;Drivers\STM32F1xx_HAL_Driver\Inc\stm32f1xx_hal_gpio_ex.h;Drivers\STM32F1xx_HAL_Driver\Src\stm32f1xx_hal_gpio_ex.c;Drivers\STM32F1xx_HAL_Driver\Inc\stm32f1xx_ll_gpio.h;Drivers\STM32F1xx_HAL_Driver\Inc\stm32f1xx_hal_dma_ex.h;Drivers\STM32F1xx_HAL_Driver\Inc\stm32f1xx_hal_dma.h;Drivers\STM32F1xx_HAL_Driver\Inc\stm32f1xx_ll_dma.h;Drivers\STM32F1xx_HAL_Driver\Inc\stm32f1xx_hal_cortex.h;Drivers\STM32F1xx_HAL_Driver\Inc\stm32f1xx_ll_cortex.h;Drivers\STM32F1xx_HAL_Driver\Inc\stm32f1xx_hal_pwr.h;Drivers\STM32F1xx_HAL_Driver\Inc\stm32f1xx_ll_pwr.h;Drivers\STM32F1xx_HAL_Driver\Inc\stm32f1xx_hal_flash.h;Drivers\STM32F1xx_HAL_Driver\Inc\stm32f1xx_hal_flash_ex.h;Drivers\STM32F1xx_HAL_Driver\Inc\stm32f1xx_hal_exti.h;Drivers\STM32F1xx_HAL_Driver\Inc\stm32f1xx_ll_exti.h;Drivers\STM32F1xx_HAL_Driver\Inc\stm32f1xx_hal_uart.h;Drivers\STM32F1xx_HAL_Driver\Inc\stm32f1xx_ll_usart.h;Drivers\CMSIS\Device\ST\STM32F1xx\Include\stm32f103xb.h;Drivers\CMSIS\Device\ST\STM32F1xx\Include\stm32f1xx.h;Drivers\CMSIS\Device\ST\STM32F1xx\Include\system_stm32f1xx.h;Drivers\CMSIS\Device\ST\STM32F1xx\Source\Templates\system_stm32f1xx.c;Drivers\CMSIS\Include\cmsis_armcc.h;Drivers\CMSIS\Include\cmsis_armclang.h;Drivers\CMSIS\Include\cmsis_compiler.h;Drivers\CMSIS\Include\cmsis_gcc.h;Drivers\CMSIS\Include\cmsis_iccarm.h;Drivers\CMSIS\Include\cmsis_version.h;Drivers\CMSIS\Include\core_armv8mbl.h;Drivers\CMSIS\Include\core_armv8mml.h;Drivers\CMSIS\Include\core_cm0.h;Drivers\CMSIS\Include\core_cm0plus.h;Drivers\CMSIS\Include\core_cm1.h;Drivers\CMSIS\Include\core_cm23.h;Drivers\CMSIS\Include\core_cm3.h;Drivers\CMSIS\Include\core_cm33.h;Drivers\CMSIS\Include\core_cm4.h;Drivers\CMSIS\Include\core_cm7.h;Drivers\CMSIS\Include\core_sc000.h;Drivers\CMSIS\Include\core_sc300.h;Drivers\CMSIS\Include\mpu_armv7.h;Drivers\CMSIS\Include\mpu_armv8.h;Drivers\CMSIS\Include\tz_context.h;
[PreviousUsedCubeIDEFiles]
SourceFiles=Core\Src\main.c;Core\Src\gpio.c;Core\Src\tim.c;Core\Src\usart.c;Core\Src\stm32f1xx_it.c;Core\Src\stm32f1xx_hal_msp.c;Drivers\STM32F1xx_HAL_Driver\Src\stm32f1xx_hal_gpio_ex.c;Drivers\STM32F1xx_HAL_Driver\Src\stm32f1xx_hal_tim.c;Drivers\STM32F1xx_HAL_Driver\Src\stm32f1xx_hal_tim_ex.c;Drivers\STM32F1xx_HAL_Driver\Src\stm32f1xx_hal.c;Drivers\STM32F1xx_HAL_Driver\Src\stm32f1xx_hal_rcc.c;Drivers\STM32F1xx_HAL_Driver\Src\stm32f1xx_hal_rcc_ex.c;Drivers\STM32F1xx_HAL_Driver\Src\stm32f1xx_hal_gpio.c;Drivers\STM32F1xx_HAL_Driver\Src\stm32f1xx_hal_dma.c;Drivers\STM32F1xx_HAL_Driver\Src\stm32f1xx_hal_cortex.c;Drivers\STM32F1xx_HAL_Driver\Src\stm32f1xx_hal_pwr.c;Drivers\STM32F1xx_HAL_Driver\Src\stm32f1xx_hal_flash.c;Drivers\STM32F1xx_HAL_Driver\Src\stm32f1xx_hal_flash_ex.c;Drivers\STM32F1xx_HAL_Driver\Src\stm32f1xx_hal_exti.c;Drivers\STM32F1xx_HAL_Driver\Src\stm32f1xx_hal_uart.c;Drivers\CMSIS\Device\ST\STM32F1xx\Source\Templates\system_stm32f1xx.c;Core\Src\system_stm32f1xx.c;Drivers\STM32F1xx_HAL_Driver\Src\stm32f1xx_hal_gpio_ex.c;Drivers\STM32F1xx_HAL_Driver\Src\stm32f1xx_hal_tim.c;Drivers\STM32F1xx_HAL_Driver\Src\stm32f1xx_hal_tim_ex.c;Drivers\STM32F1xx_HAL_Driver\Src\stm32f1xx_hal.c;Drivers\STM32F1xx_HAL_Driver\Src\stm32f1xx_hal_rcc.c;Drivers\STM32F1xx_HAL_Driver\Src\stm32f1xx_hal_rcc_ex.c;Drivers\STM32F1xx_HAL_Driver\Src\stm32f1xx_hal_gpio.c;Drivers\STM32F1xx_HAL_Driver\Src\stm32f1xx_hal_dma.c;Drivers\STM32F1xx_HAL_Driver\Src\stm32f1xx_hal_cortex.c;Drivers\STM32F1xx_HAL_Driver\Src\stm32f1xx_hal_pwr.c;Drivers\STM32F1xx_HAL_Driver\Src\stm32f1xx_hal_flash.c;Drivers\STM32F1xx_HAL_Driver\Src\stm32f1xx_hal_flash_ex.c;Drivers\STM32F1xx_HAL_Driver\Src\stm32f1xx_hal_exti.c;Drivers\STM32F1xx_HAL_Driver\Src\stm32f1xx_hal_uart.c;Drivers\CMSIS\Device\ST\STM32F1xx\Source\Templates\system_stm32f1xx.c;Core\Src\system_stm32f1xx.c;;;
HeaderPath=Drivers\STM32F1xx_HAL_Driver\Inc;Drivers\STM32F1xx_HAL_Driver\Inc\Legacy;Drivers\CMSIS\Device\ST\STM32F1xx\Include;Drivers\CMSIS\Include;Core\Inc;
CDefines=USE_HAL_DRIVER;STM32F103xB;USE_HAL_DRIVER;USE_HAL_DRIVER;
[PreviousGenFiles]
AdvancedFolderStructure=true
HeaderFileListSize=6
HeaderFiles#0=..\Core\Inc\gpio.h
HeaderFiles#1=..\Core\Inc\tim.h
HeaderFiles#2=..\Core\Inc\usart.h
HeaderFiles#3=..\Core\Inc\stm32f1xx_it.h
HeaderFiles#4=..\Core\Inc\stm32f1xx_hal_conf.h
HeaderFiles#5=..\Core\Inc\main.h
HeaderFolderListSize=1
HeaderPath#0=..\Core\Inc
HeaderFiles=;
SourceFileListSize=6
SourceFiles#0=..\Core\Src\gpio.c
SourceFiles#1=..\Core\Src\tim.c
SourceFiles#2=..\Core\Src\usart.c
SourceFiles#3=..\Core\Src\stm32f1xx_it.c
SourceFiles#4=..\Core\Src\stm32f1xx_hal_msp.c
SourceFiles#5=..\Core\Src\main.c
SourceFolderListSize=1
SourcePath#0=..\Core\Src
SourceFiles=;
<?xml version="1.0" encoding="UTF-8"?>
<projectDescription>
<name>pjs_spoon</name>
<comment></comment>
<projects>
</projects>
<buildSpec>
<buildCommand>
<name>org.eclipse.cdt.managedbuilder.core.genmakebuilder</name>
<triggers>clean,full,incremental,</triggers>
<arguments>
</arguments>
</buildCommand>
<buildCommand>
<name>org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder</name>
<triggers>full,incremental,</triggers>
<arguments>
</arguments>
</buildCommand>
</buildSpec>
<natures>
<nature>com.st.stm32cube.ide.mcu.MCUProjectNature</nature>
<nature>com.st.stm32cube.ide.mcu.MCUCubeProjectNature</nature>
<nature>org.eclipse.cdt.core.cnature</nature>
<nature>org.eclipse.cdt.core.ccnature</nature>
<nature>com.st.stm32cube.ide.mcu.MCUCubeIdeServicesRevAev2ProjectNature</nature>
<nature>com.st.stm32cube.ide.mcu.MCUAdvancedStructureProjectNature</nature>
<nature>com.st.stm32cube.ide.mcu.MCUSingleCpuProjectNature</nature>
<nature>com.st.stm32cube.ide.mcu.MCURootProjectNature</nature>
<nature>org.eclipse.cdt.managedbuilder.core.managedBuildNature</nature>
<nature>org.eclipse.cdt.managedbuilder.core.ScannerConfigNature</nature>
</natures>
</projectDescription>
<?xml version="1.0" encoding="UTF-8" standalone="no"?>
<project>
<configuration id="com.st.stm32cube.ide.mcu.gnu.managedbuild.config.exe.debug.492566765" name="Debug">
<extension point="org.eclipse.cdt.core.LanguageSettingsProvider">
<provider copy-of="extension" id="org.eclipse.cdt.ui.UserLanguageSettingsProvider"/>
<provider-reference id="org.eclipse.cdt.core.ReferencedProjectsLanguageSettingsProvider" ref="shared-provider"/>
<provider-reference id="org.eclipse.cdt.managedbuilder.core.MBSLanguageSettingsProvider" ref="shared-provider"/>
<provider class="com.st.stm32cube.ide.mcu.toolchain.armnone.setup.CrossBuiltinSpecsDetector" console="false" env-hash="-229698136656593732" id="com.st.stm32cube.ide.mcu.toolchain.armnone.setup.CrossBuiltinSpecsDetector" keep-relative-paths="false" name="MCU ARM GCC Built-in Compiler Settings" parameter="${COMMAND} ${FLAGS} -E -P -v -dD &quot;${INPUTS}&quot;" prefer-non-shared="true">
<language-scope id="org.eclipse.cdt.core.gcc"/>
<language-scope id="org.eclipse.cdt.core.g++"/>
</provider>
</extension>
</configuration>
<configuration id="com.st.stm32cube.ide.mcu.gnu.managedbuild.config.exe.release.1543821265" name="Release">
<extension point="org.eclipse.cdt.core.LanguageSettingsProvider">
<provider copy-of="extension" id="org.eclipse.cdt.ui.UserLanguageSettingsProvider"/>
<provider-reference id="org.eclipse.cdt.core.ReferencedProjectsLanguageSettingsProvider" ref="shared-provider"/>
<provider-reference id="org.eclipse.cdt.managedbuilder.core.MBSLanguageSettingsProvider" ref="shared-provider"/>
<provider class="com.st.stm32cube.ide.mcu.toolchain.armnone.setup.CrossBuiltinSpecsDetector" console="false" env-hash="-229698136656593732" id="com.st.stm32cube.ide.mcu.toolchain.armnone.setup.CrossBuiltinSpecsDetector" keep-relative-paths="false" name="MCU ARM GCC Built-in Compiler Settings" parameter="${COMMAND} ${FLAGS} -E -P -v -dD &quot;${INPUTS}&quot;" prefer-non-shared="true">
<language-scope id="org.eclipse.cdt.core.gcc"/>
<language-scope id="org.eclipse.cdt.core.g++"/>
</provider>
</extension>
</configuration>
</project>
\ No newline at end of file
66BE74F758C12D739921AEA421D593D3=0
8DF89ED150041C4CBC7CB9A9CAA90856=BD81A38ABCB6A8D22A0F87C5AFB577AD
DC22A860405A8BF2F2C095E5B6529F12=BD81A38ABCB6A8D22A0F87C5AFB577AD
eclipse.preferences.version=1
{
"version": "0.2.1",
"configurations": [
{
"project": "CMakeLists.txt",
"projectTarget": "pjs_spoon.elf",
"name": "Launch",
"type": "cppdbg",
"request": "launch",
"cwd": "${workspaceRoot}",
"program": "${debugInfo.fullTargetPath}",
"MIMode": "gdb",
"miDebuggerPath": "${st.gdb}",
"miDebuggerServerAddress": "localhost:3333",
"debugServerPath": "${st.gdbserver}",
"debugServerArgs": "--stm32cubeprogrammer-path ${st.cubeprogrammer} --swd --port-number 3333",
"serverStarted": "Waiting for connection on port .*\\.\\.\\.",
"stopAtConnect": true,
"postRemoteConnectCommands": [
{
"text": "load build/debug/build/pjs_spoon.elf"
}
],
"svdPath": "${st.svd}/STM32F103.svd" }
]
}
\ No newline at end of file
{
"recommendations": [
"ms-vscode.cmake-tools",
"ms-vscode.cpptools",
"ms-vscode.vscode-embedded-tools"
]
}
{
"version": "0.2.0",
"configurations": [
{
"name": "Launch",
"type": "cppdbg",
"request": "launch",
"cwd": "${workspaceFolder}",
"program": "${command:cmake.launchTargetPath}",
"MIMode": "gdb",
"miDebuggerPath": "${command:vscode-embedded.st.gdb}",
"miDebuggerServerAddress": "localhost:3333",
"debugServerPath": "${command:vscode-embedded.st.gdbserver}",
"debugServerArgs": "--stm32cubeprogrammer-path ${command:vscode-embedded.st.cubeprogrammer} --swd --port-number 3333",
"serverStarted": "Waiting for connection on port .*\\.\\.\\.",
"stopAtConnect": true,
"postRemoteConnectCommands": [
{
"text": "load build/debug/build/pjs_spoon.elf"
}
],
"logging": {
"engineLogging": true
},
"preLaunchTask": "Build",
"svdPath": "${command:vscode-embedded.st.svd}/STM32F103.svd"
}
]
}
{
"C_Cpp.default.configurationProvider": "ms-vscode.cmake-tools",
"cmake.configureOnOpen": true,
"MicroPython.executeButton": [
{
"text": "▶",
"tooltip": "运行",
"alignment": "left",
"command": "extension.executeFile",
"priority": 3.5
}
],
"MicroPython.syncButton": [
{
"text": "$(sync)",
"tooltip": "同步",
"alignment": "left",
"command": "extension.execute",
"priority": 4
}
],
"C_Cpp.errorSquiggles": "disabled",
"files.associations": {
"*.vue": "vue",
"*.md": "markdown",
"string": "cpp",
"iostream": "cpp"
}
}
{
"version": "2.0.0",
"tasks": [
{
"label": "Build",
"type": "cmake",
"command": "build",
"problemMatcher": "$gcc",
"group": {
"kind": "build",
"isDefault": true
}
}
]
}
cmake_minimum_required(VERSION 3.20)
project("pjs_spoon" C CXX ASM)
include(cmake/st-project.cmake)
add_executable(${PROJECT_NAME})
add_st_target_properties(${PROJECT_NAME})
\ No newline at end of file
{
"version": 2,
"configurePresets": [
{
"name": "default",
"hidden": true,
"generator": "Ninja",
"binaryDir": "${sourceDir}/build/${presetName}/build",
"cacheVariables": {
"CMAKE_INSTALL_PREFIX": "${sourceDir}/build/${presetName}/install",
"CMAKE_TOOLCHAIN_FILE": {
"type": "FILEPATH",
"value": "${sourceDir}/cmake/gcc-arm-none-eabi.cmake"
}
},
"architecture": {
"value": "unspecified",
"strategy": "external"
},
"vendor": {
"microsoft.com/VisualStudioSettings/CMake/1.0": {
"intelliSenseMode": "linux-gcc-arm"
}
}
},
{
"name": "debug",
"inherits": "default",
"cacheVariables": {
"CMAKE_BUILD_TYPE": "Debug",
"PRESET_NAME": "debug"
}
},
{
"name": "release",
"inherits": "default",
"cacheVariables": {
"CMAKE_BUILD_TYPE": "Release",
"PRESET_NAME": "release"
}
}
],
"buildPresets": [
{
"name": "debug",
"configurePreset": "debug"
},
{
"name": "release",
"configurePreset": "release"
}
]
}
/* USER CODE BEGIN Header */
/**
******************************************************************************
* @file gpio.h
* @brief This file contains all the function prototypes for
* the gpio.c file
******************************************************************************
* @attention
*
* Copyright (c) 2023 STMicroelectronics.
* All rights reserved.
*
* This software is licensed under terms that can be found in the LICENSE file
* in the root directory of this software component.
* If no LICENSE file comes with this software, it is provided AS-IS.
*
******************************************************************************
*/
/* USER CODE END Header */
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __GPIO_H__
#define __GPIO_H__
#ifdef __cplusplus
extern "C" {
#endif
/* Includes ------------------------------------------------------------------*/
#include "main.h"
/* USER CODE BEGIN Includes */
/* USER CODE END Includes */
/* USER CODE BEGIN Private defines */
/* USER CODE END Private defines */
void MX_GPIO_Init(void);
/* USER CODE BEGIN Prototypes */
/* USER CODE END Prototypes */
#ifdef __cplusplus
}
#endif
#endif /*__ GPIO_H__ */
/**
* @file i2c
* @brief zzy
*
* @version 0.1
* @date 2023-05-13
*
* @copyright Copyright (c) 2023
*
*/
#ifndef __I2C_H_
#define __I2C_H_
#include "main.h"
#include <stdlib.h>
class IIC
{
private:
GPIO_TypeDef *SCL_GPIO_PORT;
uint16_t SCL_PIN;
GPIO_TypeDef *SDA_GPIO_PORT;
uint16_t SDA_PIN;
public:
IIC(GPIO_TypeDef *scl_gpio_port, uint16_t scl_pin, GPIO_TypeDef *sda_gpio_port, uint16_t sda_pin);
void WriteSDA(GPIO_PinState PinState);
void WriteSCL(GPIO_PinState PinState);
GPIO_PinState ReadSDA();
GPIO_PinState ReadSCL();
void Delay();
void Start();
void End();
void Send_ACK(uint8_t ack);
uint8_t Get_ACK();
uint8_t SendByte(uint8_t dat);
uint8_t ReadByte(uint8_t ack);
uint8_t WriteLen(uint8_t addr, uint8_t reg, uint8_t len, uint8_t *buf);
uint8_t ReadLen(uint8_t addr, uint8_t reg, uint8_t len, uint8_t *buf);
};
#endif
\ No newline at end of file
/* USER CODE BEGIN Header */
/**
******************************************************************************
* @file : main.h
* @brief : Header for main.c file.
* This file contains the common defines of the application.
******************************************************************************
* @attention
*
* Copyright (c) 2023 STMicroelectronics.
* All rights reserved.
*
* This software is licensed under terms that can be found in the LICENSE file
* in the root directory of this software component.
* If no LICENSE file comes with this software, it is provided AS-IS.
*
******************************************************************************
*/
/* USER CODE END Header */
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __MAIN_H
#define __MAIN_H
#ifdef __cplusplus
extern "C" {
#endif
/* Includes ------------------------------------------------------------------*/
#include "stm32f1xx_hal.h"
/* Private includes ----------------------------------------------------------*/
/* USER CODE BEGIN Includes */
/* USER CODE END Includes */
/* Exported types ------------------------------------------------------------*/
/* USER CODE BEGIN ET */
/* USER CODE END ET */
/* Exported constants --------------------------------------------------------*/
/* USER CODE BEGIN EC */
/* USER CODE END EC */
/* Exported macro ------------------------------------------------------------*/
/* USER CODE BEGIN EM */
/* USER CODE END EM */
/* Exported functions prototypes ---------------------------------------------*/
void Error_Handler(void);
/* USER CODE BEGIN EFP */
/* USER CODE END EFP */
/* Private defines -----------------------------------------------------------*/
#define I2C_SCL_Pin GPIO_PIN_6
#define I2C_SCL_GPIO_Port GPIOB
#define I2C_SDA_Pin GPIO_PIN_7
#define I2C_SDA_GPIO_Port GPIOB
/* USER CODE BEGIN Private defines */
/* USER CODE END Private defines */
#ifdef __cplusplus
}
#endif
#endif /* __MAIN_H */
/**
* @file mpu6050.h
* @author zzy
* @brief mpu6050驱动头文件
* @version 0.1
* @date 2023-05-11
*
* @copyright Copyright (c) 2023
*
*/
#ifndef _MPU6050_H
#define _MPU6050_H
#include "main.h"
#include <stdlib.h>
#include <math.h>
#include "i2c.h"
#define RAD_TO_DEG 57.3
#define WHO_AM_I_REG 0x75
#define PWR_MGMT_1_REG 0x6B
#define SMPLRT_DIV_REG 0x19
#define ACCEL_CONFIG_REG 0x1C
#define ACCEL_XOUT_H_REG 0x3B
#define TEMP_OUT_H_REG 0x41
#define GYRO_CONFIG_REG 0x1B
#define GYRO_XOUT_H_REG 0x43
IIC iic(GPIOB, GPIO_PIN_6, GPIOB, GPIO_PIN_7);
/**
* @brief MPU6050数据类型结构体
*
*/
typedef struct
{
int16_t Accel_X_RAW;
int16_t Accel_Y_RAW;
int16_t Accel_Z_RAW;
double Ax;
double Ay;
double Az;
int16_t Gyro_X_RAW;
int16_t Gyro_Y_RAW;
int16_t Gyro_Z_RAW;
double Gx;
double Gy;
double Gz;
float Temperature;
double KalmanAngleX;
double KalmanAngleY;
} MPU6050_t;
/**
* @brief Kalman滤波所用数据结构体
*
*/
typedef struct
{
double Q_angle;
double Q_bias;
double R_measure;
double angle;
double bias;
double P[2][2];
} Kalman_t;
/**
* @brief 驱动MPU6050的类
*
*/
class MPU6050
{
private:
uint16_t __addr__;
uint8_t WriteByte(uint8_t reg, uint8_t data);
uint8_t ReadByte(uint8_t reg);
public:
MPU6050(uint16_t addr);
uint8_t init();
void Read_Accel(MPU6050_t *DataStruct);
void Read_Gyro(MPU6050_t *DataStruct);
void Read_Temp(MPU6050_t *DataStruct);
void Read_All(MPU6050_t *DataStruct);
double Kalman_getAngle(Kalman_t *Kalman, double newAngle, double newRate, double dt);
};
#endif
\ No newline at end of file
#ifndef __START_H_
#define __START_H_
#ifdef __cplusplus
extern "C"
{
#endif
void setup(void);
void loop(void);
#ifdef __cplusplus
}
#endif
#endif
/* USER CODE BEGIN Header */
/**
******************************************************************************
* @file stm32f1xx_hal_conf.h
* @brief HAL configuration file.
******************************************************************************
* @attention
*
* Copyright (c) 2017 STMicroelectronics.
* All rights reserved.
*
* This software is licensed under terms that can be found in the LICENSE file
* in the root directory of this software component.
* If no LICENSE file comes with this software, it is provided AS-IS.
*
******************************************************************************
*/
/* USER CODE END Header */
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __STM32F1xx_HAL_CONF_H
#define __STM32F1xx_HAL_CONF_H
#ifdef __cplusplus
extern "C" {
#endif
/* Exported types ------------------------------------------------------------*/
/* Exported constants --------------------------------------------------------*/
/* ########################## Module Selection ############################## */
/**
* @brief This is the list of modules to be used in the HAL driver
*/
#define HAL_MODULE_ENABLED
/*#define HAL_ADC_MODULE_ENABLED */
/*#define HAL_CRYP_MODULE_ENABLED */
/*#define HAL_CAN_MODULE_ENABLED */
/*#define HAL_CAN_LEGACY_MODULE_ENABLED */
/*#define HAL_CEC_MODULE_ENABLED */
/*#define HAL_CORTEX_MODULE_ENABLED */
/*#define HAL_CRC_MODULE_ENABLED */
/*#define HAL_DAC_MODULE_ENABLED */
/*#define HAL_DMA_MODULE_ENABLED */
/*#define HAL_ETH_MODULE_ENABLED */
/*#define HAL_FLASH_MODULE_ENABLED */
#define HAL_GPIO_MODULE_ENABLED
/*#define HAL_I2C_MODULE_ENABLED */
/*#define HAL_I2S_MODULE_ENABLED */
/*#define HAL_IRDA_MODULE_ENABLED */
/*#define HAL_IWDG_MODULE_ENABLED */
/*#define HAL_NOR_MODULE_ENABLED */
/*#define HAL_NAND_MODULE_ENABLED */
/*#define HAL_PCCARD_MODULE_ENABLED */
/*#define HAL_PCD_MODULE_ENABLED */
/*#define HAL_HCD_MODULE_ENABLED */
/*#define HAL_PWR_MODULE_ENABLED */
/*#define HAL_RCC_MODULE_ENABLED */
/*#define HAL_RTC_MODULE_ENABLED */
/*#define HAL_SD_MODULE_ENABLED */
/*#define HAL_MMC_MODULE_ENABLED */
/*#define HAL_SDRAM_MODULE_ENABLED */
/*#define HAL_SMARTCARD_MODULE_ENABLED */
/*#define HAL_SPI_MODULE_ENABLED */
/*#define HAL_SRAM_MODULE_ENABLED */
#define HAL_TIM_MODULE_ENABLED
#define HAL_UART_MODULE_ENABLED
/*#define HAL_USART_MODULE_ENABLED */
/*#define HAL_WWDG_MODULE_ENABLED */
#define HAL_CORTEX_MODULE_ENABLED
#define HAL_DMA_MODULE_ENABLED
#define HAL_FLASH_MODULE_ENABLED
#define HAL_EXTI_MODULE_ENABLED
#define HAL_GPIO_MODULE_ENABLED
#define HAL_PWR_MODULE_ENABLED
#define HAL_RCC_MODULE_ENABLED
/* ########################## Oscillator Values adaptation ####################*/
/**
* @brief Adjust the value of External High Speed oscillator (HSE) used in your application.
* This value is used by the RCC HAL module to compute the system frequency
* (when HSE is used as system clock source, directly or through the PLL).
*/
#if !defined (HSE_VALUE)
#define HSE_VALUE 8000000U /*!< Value of the External oscillator in Hz */
#endif /* HSE_VALUE */
#if !defined (HSE_STARTUP_TIMEOUT)
#define HSE_STARTUP_TIMEOUT 100U /*!< Time out for HSE start up, in ms */
#endif /* HSE_STARTUP_TIMEOUT */
/**
* @brief Internal High Speed oscillator (HSI) value.
* This value is used by the RCC HAL module to compute the system frequency
* (when HSI is used as system clock source, directly or through the PLL).
*/
#if !defined (HSI_VALUE)
#define HSI_VALUE 8000000U /*!< Value of the Internal oscillator in Hz*/
#endif /* HSI_VALUE */
/**
* @brief Internal Low Speed oscillator (LSI) value.
*/
#if !defined (LSI_VALUE)
#define LSI_VALUE 40000U /*!< LSI Typical Value in Hz */
#endif /* LSI_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz
The real value may vary depending on the variations
in voltage and temperature. */
/**
* @brief External Low Speed oscillator (LSE) value.
* This value is used by the UART, RTC HAL module to compute the system frequency
*/
#if !defined (LSE_VALUE)
#define LSE_VALUE 32768U /*!< Value of the External oscillator in Hz*/
#endif /* LSE_VALUE */
#if !defined (LSE_STARTUP_TIMEOUT)
#define LSE_STARTUP_TIMEOUT 5000U /*!< Time out for LSE start up, in ms */
#endif /* LSE_STARTUP_TIMEOUT */
/* Tip: To avoid modifying this file each time you need to use different HSE,
=== you can define the HSE value in your toolchain compiler preprocessor. */
/* ########################### System Configuration ######################### */
/**
* @brief This is the HAL system configuration section
*/
#define VDD_VALUE 3300U /*!< Value of VDD in mv */
#define TICK_INT_PRIORITY 15U /*!< tick interrupt priority (lowest by default) */
#define USE_RTOS 0U
#define PREFETCH_ENABLE 1U
#define USE_HAL_ADC_REGISTER_CALLBACKS 0U /* ADC register callback disabled */
#define USE_HAL_CAN_REGISTER_CALLBACKS 0U /* CAN register callback disabled */
#define USE_HAL_CEC_REGISTER_CALLBACKS 0U /* CEC register callback disabled */
#define USE_HAL_DAC_REGISTER_CALLBACKS 0U /* DAC register callback disabled */
#define USE_HAL_ETH_REGISTER_CALLBACKS 0U /* ETH register callback disabled */
#define USE_HAL_HCD_REGISTER_CALLBACKS 0U /* HCD register callback disabled */
#define USE_HAL_I2C_REGISTER_CALLBACKS 0U /* I2C register callback disabled */
#define USE_HAL_I2S_REGISTER_CALLBACKS 0U /* I2S register callback disabled */
#define USE_HAL_MMC_REGISTER_CALLBACKS 0U /* MMC register callback disabled */
#define USE_HAL_NAND_REGISTER_CALLBACKS 0U /* NAND register callback disabled */
#define USE_HAL_NOR_REGISTER_CALLBACKS 0U /* NOR register callback disabled */
#define USE_HAL_PCCARD_REGISTER_CALLBACKS 0U /* PCCARD register callback disabled */
#define USE_HAL_PCD_REGISTER_CALLBACKS 0U /* PCD register callback disabled */
#define USE_HAL_RTC_REGISTER_CALLBACKS 0U /* RTC register callback disabled */
#define USE_HAL_SD_REGISTER_CALLBACKS 0U /* SD register callback disabled */
#define USE_HAL_SMARTCARD_REGISTER_CALLBACKS 0U /* SMARTCARD register callback disabled */
#define USE_HAL_IRDA_REGISTER_CALLBACKS 0U /* IRDA register callback disabled */
#define USE_HAL_SRAM_REGISTER_CALLBACKS 0U /* SRAM register callback disabled */
#define USE_HAL_SPI_REGISTER_CALLBACKS 0U /* SPI register callback disabled */
#define USE_HAL_TIM_REGISTER_CALLBACKS 0U /* TIM register callback disabled */
#define USE_HAL_UART_REGISTER_CALLBACKS 0U /* UART register callback disabled */
#define USE_HAL_USART_REGISTER_CALLBACKS 0U /* USART register callback disabled */
#define USE_HAL_WWDG_REGISTER_CALLBACKS 0U /* WWDG register callback disabled */
/* ########################## Assert Selection ############################## */
/**
* @brief Uncomment the line below to expanse the "assert_param" macro in the
* HAL drivers code
*/
/* #define USE_FULL_ASSERT 1U */
/* ################## Ethernet peripheral configuration ##################### */
/* Section 1 : Ethernet peripheral configuration */
/* MAC ADDRESS: MAC_ADDR0:MAC_ADDR1:MAC_ADDR2:MAC_ADDR3:MAC_ADDR4:MAC_ADDR5 */
#define MAC_ADDR0 2U
#define MAC_ADDR1 0U
#define MAC_ADDR2 0U
#define MAC_ADDR3 0U
#define MAC_ADDR4 0U
#define MAC_ADDR5 0U
/* Definition of the Ethernet driver buffers size and count */
#define ETH_RX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for receive */
#define ETH_TX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for transmit */
#define ETH_RXBUFNB 8U /* 4 Rx buffers of size ETH_RX_BUF_SIZE */
#define ETH_TXBUFNB 4U /* 4 Tx buffers of size ETH_TX_BUF_SIZE */
/* Section 2: PHY configuration section */
/* DP83848_PHY_ADDRESS Address*/
#define DP83848_PHY_ADDRESS 0x01U
/* PHY Reset delay these values are based on a 1 ms Systick interrupt*/
#define PHY_RESET_DELAY 0x000000FFU
/* PHY Configuration delay */
#define PHY_CONFIG_DELAY 0x00000FFFU
#define PHY_READ_TO 0x0000FFFFU
#define PHY_WRITE_TO 0x0000FFFFU
/* Section 3: Common PHY Registers */
#define PHY_BCR ((uint16_t)0x00) /*!< Transceiver Basic Control Register */
#define PHY_BSR ((uint16_t)0x01) /*!< Transceiver Basic Status Register */
#define PHY_RESET ((uint16_t)0x8000) /*!< PHY Reset */
#define PHY_LOOPBACK ((uint16_t)0x4000) /*!< Select loop-back mode */
#define PHY_FULLDUPLEX_100M ((uint16_t)0x2100) /*!< Set the full-duplex mode at 100 Mb/s */
#define PHY_HALFDUPLEX_100M ((uint16_t)0x2000) /*!< Set the half-duplex mode at 100 Mb/s */
#define PHY_FULLDUPLEX_10M ((uint16_t)0x0100) /*!< Set the full-duplex mode at 10 Mb/s */
#define PHY_HALFDUPLEX_10M ((uint16_t)0x0000) /*!< Set the half-duplex mode at 10 Mb/s */
#define PHY_AUTONEGOTIATION ((uint16_t)0x1000) /*!< Enable auto-negotiation function */
#define PHY_RESTART_AUTONEGOTIATION ((uint16_t)0x0200) /*!< Restart auto-negotiation function */
#define PHY_POWERDOWN ((uint16_t)0x0800) /*!< Select the power down mode */
#define PHY_ISOLATE ((uint16_t)0x0400) /*!< Isolate PHY from MII */
#define PHY_AUTONEGO_COMPLETE ((uint16_t)0x0020) /*!< Auto-Negotiation process completed */
#define PHY_LINKED_STATUS ((uint16_t)0x0004) /*!< Valid link established */
#define PHY_JABBER_DETECTION ((uint16_t)0x0002) /*!< Jabber condition detected */
/* Section 4: Extended PHY Registers */
#define PHY_SR ((uint16_t)0x10U) /*!< PHY status register Offset */
#define PHY_SPEED_STATUS ((uint16_t)0x0002U) /*!< PHY Speed mask */
#define PHY_DUPLEX_STATUS ((uint16_t)0x0004U) /*!< PHY Duplex mask */
/* ################## SPI peripheral configuration ########################## */
/* CRC FEATURE: Use to activate CRC feature inside HAL SPI Driver
* Activated: CRC code is present inside driver
* Deactivated: CRC code cleaned from driver
*/
#define USE_SPI_CRC 0U
/* Includes ------------------------------------------------------------------*/
/**
* @brief Include module's header file
*/
#ifdef HAL_RCC_MODULE_ENABLED
#include "stm32f1xx_hal_rcc.h"
#endif /* HAL_RCC_MODULE_ENABLED */
#ifdef HAL_GPIO_MODULE_ENABLED
#include "stm32f1xx_hal_gpio.h"
#endif /* HAL_GPIO_MODULE_ENABLED */
#ifdef HAL_EXTI_MODULE_ENABLED
#include "stm32f1xx_hal_exti.h"
#endif /* HAL_EXTI_MODULE_ENABLED */
#ifdef HAL_DMA_MODULE_ENABLED
#include "stm32f1xx_hal_dma.h"
#endif /* HAL_DMA_MODULE_ENABLED */
#ifdef HAL_ETH_MODULE_ENABLED
#include "stm32f1xx_hal_eth.h"
#endif /* HAL_ETH_MODULE_ENABLED */
#ifdef HAL_CAN_MODULE_ENABLED
#include "stm32f1xx_hal_can.h"
#endif /* HAL_CAN_MODULE_ENABLED */
#ifdef HAL_CAN_LEGACY_MODULE_ENABLED
#include "Legacy/stm32f1xx_hal_can_legacy.h"
#endif /* HAL_CAN_LEGACY_MODULE_ENABLED */
#ifdef HAL_CEC_MODULE_ENABLED
#include "stm32f1xx_hal_cec.h"
#endif /* HAL_CEC_MODULE_ENABLED */
#ifdef HAL_CORTEX_MODULE_ENABLED
#include "stm32f1xx_hal_cortex.h"
#endif /* HAL_CORTEX_MODULE_ENABLED */
#ifdef HAL_ADC_MODULE_ENABLED
#include "stm32f1xx_hal_adc.h"
#endif /* HAL_ADC_MODULE_ENABLED */
#ifdef HAL_CRC_MODULE_ENABLED
#include "stm32f1xx_hal_crc.h"
#endif /* HAL_CRC_MODULE_ENABLED */
#ifdef HAL_DAC_MODULE_ENABLED
#include "stm32f1xx_hal_dac.h"
#endif /* HAL_DAC_MODULE_ENABLED */
#ifdef HAL_FLASH_MODULE_ENABLED
#include "stm32f1xx_hal_flash.h"
#endif /* HAL_FLASH_MODULE_ENABLED */
#ifdef HAL_SRAM_MODULE_ENABLED
#include "stm32f1xx_hal_sram.h"
#endif /* HAL_SRAM_MODULE_ENABLED */
#ifdef HAL_NOR_MODULE_ENABLED
#include "stm32f1xx_hal_nor.h"
#endif /* HAL_NOR_MODULE_ENABLED */
#ifdef HAL_I2C_MODULE_ENABLED
#include "stm32f1xx_hal_i2c.h"
#endif /* HAL_I2C_MODULE_ENABLED */
#ifdef HAL_I2S_MODULE_ENABLED
#include "stm32f1xx_hal_i2s.h"
#endif /* HAL_I2S_MODULE_ENABLED */
#ifdef HAL_IWDG_MODULE_ENABLED
#include "stm32f1xx_hal_iwdg.h"
#endif /* HAL_IWDG_MODULE_ENABLED */
#ifdef HAL_PWR_MODULE_ENABLED
#include "stm32f1xx_hal_pwr.h"
#endif /* HAL_PWR_MODULE_ENABLED */
#ifdef HAL_RTC_MODULE_ENABLED
#include "stm32f1xx_hal_rtc.h"
#endif /* HAL_RTC_MODULE_ENABLED */
#ifdef HAL_PCCARD_MODULE_ENABLED
#include "stm32f1xx_hal_pccard.h"
#endif /* HAL_PCCARD_MODULE_ENABLED */
#ifdef HAL_SD_MODULE_ENABLED
#include "stm32f1xx_hal_sd.h"
#endif /* HAL_SD_MODULE_ENABLED */
#ifdef HAL_NAND_MODULE_ENABLED
#include "stm32f1xx_hal_nand.h"
#endif /* HAL_NAND_MODULE_ENABLED */
#ifdef HAL_SPI_MODULE_ENABLED
#include "stm32f1xx_hal_spi.h"
#endif /* HAL_SPI_MODULE_ENABLED */
#ifdef HAL_TIM_MODULE_ENABLED
#include "stm32f1xx_hal_tim.h"
#endif /* HAL_TIM_MODULE_ENABLED */
#ifdef HAL_UART_MODULE_ENABLED
#include "stm32f1xx_hal_uart.h"
#endif /* HAL_UART_MODULE_ENABLED */
#ifdef HAL_USART_MODULE_ENABLED
#include "stm32f1xx_hal_usart.h"
#endif /* HAL_USART_MODULE_ENABLED */
#ifdef HAL_IRDA_MODULE_ENABLED
#include "stm32f1xx_hal_irda.h"
#endif /* HAL_IRDA_MODULE_ENABLED */
#ifdef HAL_SMARTCARD_MODULE_ENABLED
#include "stm32f1xx_hal_smartcard.h"
#endif /* HAL_SMARTCARD_MODULE_ENABLED */
#ifdef HAL_WWDG_MODULE_ENABLED
#include "stm32f1xx_hal_wwdg.h"
#endif /* HAL_WWDG_MODULE_ENABLED */
#ifdef HAL_PCD_MODULE_ENABLED
#include "stm32f1xx_hal_pcd.h"
#endif /* HAL_PCD_MODULE_ENABLED */
#ifdef HAL_HCD_MODULE_ENABLED
#include "stm32f1xx_hal_hcd.h"
#endif /* HAL_HCD_MODULE_ENABLED */
#ifdef HAL_MMC_MODULE_ENABLED
#include "stm32f1xx_hal_mmc.h"
#endif /* HAL_MMC_MODULE_ENABLED */
/* Exported macro ------------------------------------------------------------*/
#ifdef USE_FULL_ASSERT
/**
* @brief The assert_param macro is used for function's parameters check.
* @param expr If expr is false, it calls assert_failed function
* which reports the name of the source file and the source
* line number of the call that failed.
* If expr is true, it returns no value.
* @retval None
*/
#define assert_param(expr) ((expr) ? (void)0U : assert_failed((uint8_t *)__FILE__, __LINE__))
/* Exported functions ------------------------------------------------------- */
void assert_failed(uint8_t* file, uint32_t line);
#else
#define assert_param(expr) ((void)0U)
#endif /* USE_FULL_ASSERT */
#ifdef __cplusplus
}
#endif
#endif /* __STM32F1xx_HAL_CONF_H */
/* USER CODE BEGIN Header */
/**
******************************************************************************
* @file stm32f1xx_it.h
* @brief This file contains the headers of the interrupt handlers.
******************************************************************************
* @attention
*
* Copyright (c) 2023 STMicroelectronics.
* All rights reserved.
*
* This software is licensed under terms that can be found in the LICENSE file
* in the root directory of this software component.
* If no LICENSE file comes with this software, it is provided AS-IS.
*
******************************************************************************
*/
/* USER CODE END Header */
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __STM32F1xx_IT_H
#define __STM32F1xx_IT_H
#ifdef __cplusplus
extern "C" {
#endif
/* Private includes ----------------------------------------------------------*/
/* USER CODE BEGIN Includes */
/* USER CODE END Includes */
/* Exported types ------------------------------------------------------------*/
/* USER CODE BEGIN ET */
/* USER CODE END ET */
/* Exported constants --------------------------------------------------------*/
/* USER CODE BEGIN EC */
/* USER CODE END EC */
/* Exported macro ------------------------------------------------------------*/
/* USER CODE BEGIN EM */
/* USER CODE END EM */
/* Exported functions prototypes ---------------------------------------------*/
void NMI_Handler(void);
void HardFault_Handler(void);
void MemManage_Handler(void);
void BusFault_Handler(void);
void UsageFault_Handler(void);
void SVC_Handler(void);
void DebugMon_Handler(void);
void PendSV_Handler(void);
void SysTick_Handler(void);
/* USER CODE BEGIN EFP */
/* USER CODE END EFP */
#ifdef __cplusplus
}
#endif
#endif /* __STM32F1xx_IT_H */
/* USER CODE BEGIN Header */
/**
******************************************************************************
* @file tim.h
* @brief This file contains all the function prototypes for
* the tim.c file
******************************************************************************
* @attention
*
* Copyright (c) 2023 STMicroelectronics.
* All rights reserved.
*
* This software is licensed under terms that can be found in the LICENSE file
* in the root directory of this software component.
* If no LICENSE file comes with this software, it is provided AS-IS.
*
******************************************************************************
*/
/* USER CODE END Header */
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __TIM_H__
#define __TIM_H__
#ifdef __cplusplus
extern "C" {
#endif
/* Includes ------------------------------------------------------------------*/
#include "main.h"
/* USER CODE BEGIN Includes */
/* USER CODE END Includes */
extern TIM_HandleTypeDef htim2;
/* USER CODE BEGIN Private defines */
/* USER CODE END Private defines */
void MX_TIM2_Init(void);
void HAL_TIM_MspPostInit(TIM_HandleTypeDef *htim);
/* USER CODE BEGIN Prototypes */
/* USER CODE END Prototypes */
#ifdef __cplusplus
}
#endif
#endif /* __TIM_H__ */
Supports Markdown
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment